Selwn - end-mounted silencer and adapter - 01I don’t normally ‘keep’ any adapters in stock, but instead I make them individually for each customers’s request. The adapters below are ones that I have made for my customers, and a few that I experimented with, just to see what is possible.

Nathan - Zoraki .177 & .22 Pistol Silencers - 04I normally charge only $55 for an adapter (the same price as barrel threading), although I’d need to know exactly what you are wanting, and can then confirm the price. 

Left: Zoraki over-barrel shroud / adapter threaded for a silencer.

Right: Two anodized adapters – for the same barrel, threaded 1/2″ unf x 20 tpi – to take a silencer. The thinner one is held in place with adhesive, the larger one is secured by two threaded retainers and also has an internal O-ring. 

For CO2, pneumatic and other lower powered rifle and pistols, I can make the adapter quite thin where it slides over the barrel muzzle, and this can be held in place with a small dab of engineering adhesive. For more powerful pistols and rifles (PCP and fire-arm), I often make the adapter a larger diameter where it slides over the barrel muzzle, and hold it in place with threaded retaining studs underneath the barrel/adapter. 

ZORAKI HP-01 Long Barrel ULTRA - 01

ZORAKI HP-01 Long Barrel ULTRA - 08

 

 

Left/Right: Zoraki / Webley threaded over-barrel shroud, allowing fitting of silencers and muzzle-brakes. 

 

These adapters are very strong and stable, press fitted to your CO2 or PCP barrel, allowing you to fit any standard aftermarket suppressor or muzzle-brake, precision machined from air-craft grade solid aluminum rod and then typeII anodized to the color of your choice.

 

Off-The-Shelf or Custom-Made adapters and barrel extensions – for CO2, Springer, PCP and Rim-Fire

 

  

 

 

 

 

 


 

 I offer solutions to all your thread adapter, converter and barrel extension requirements.   Threaded and Slip-On, anodized in the color of your choice, high gloss or bead blasted matte.

 

 

 

 

Barrel adapters are specially useful on Co2, PCP and Pump Action rifles and pistols whose barrels are smaller than the industry standard thread for silencers and suppressors of 1/2′ unf x 20 tpi.

 

  


 

Photo : A slip-on adapter that allows fitting of a suppressor without threading barrel.  

Several PCP rifles have barrels that are shorter than the compression air cylinder – or, customers purchase air-chamber extensions – meaning that silencers or muzzle-brakes can no longer be fitted. 

Other rifle barrels are threaded to the smaller 10mm x 1mm thread – also preventing normal after-market silencers or muzzle-brakes from being fitted to the rifle – as most silencers are standard 1/2″ unf thread.     In other cases, the length of the barrel also needs to be extended. 

I have a full range of off the shelf or custom made adapters and extensions. 


  

Right: Barrel extension

Options

1/2′ unf to 1/2′ unf

10mm to 10mm,

10mm to 1/2′ unf

Made to length – 50mm to 150mm

Any color or thread combination


 

 

Left: Adapter for Suppressor or Muzzle-Brake

Straight Tube

Options

1/2′ unf to 1/2′ unf

10mm to 1/2′ unf

Any color, length or thread combination




Right: Adapter for Suppressor or Muzzle-Brake

Rounded edges

Options

1/2′ unf to 1/2′ unf

10mm to 10mm,

10mm to 1/2′ unf

Any color, length or  thread combination 

 


 Left: Adapter for Suppressor or Muzzle-Brake

Tapered and Straight Tube

Options

1/2′ unf to 1/2′ unf

10mm to 10mm,

10mm to 1/2′ unf

Any color, any length, any degree taper, any thread combination 

 

Right: Adapter for Suppressor or Muzzle-Brake

Round with Straight Slides

Options

1/2′ unf to 1/2′ unf

10mm to 10mm,

10mm to 1/2′ unf

Any color, any length, any degree taper, any thread combination


 

 

Left: Adapter for Suppressor or Muzzle-Brake

Straight Tube Stepped

Options

1/2′ unf to 1/2′ unf

10mm to 10mm,

10mm to 1/2′ unf

Any color, any length, any degree taper, any thread combination



 

Right: Adapter for Suppressor or Muzzle-Brake

Fully Tapered

Options

1/2′ unf to 1/2′ unf

10mm to 10mm,

10mm to 1/2′ unf

Any color, any length, any degree taper, any thread combination